This room is equipped with both a podium and wireless microphone. The wireless microphone consists of a belt-pack and lavalier microphone that should remain in the room at all times. (Stored in drawer at bottom of podium in a black pouch).
The batteries installed are rechargeable and should not be removed. OIT AV Services can monitor the status of the batteries remotely, and will be responsible for keeping fresh batteries installed. If the microphone does not respond when it is turned on, please call 801-422-SOS1 (7671), and new batteries will be delivered immediately.
The volume of the microphones in this room are controlled by the AV Control Panel located on the desk to the side of the TEC Podium.
If the touch panel is asleep (blank), touch it to wake it up. You may briefly see a spinning arrow.
If you are only using microphones and not the display system, wait for the system to come on and then select the Audio Only icon.
Display System and Microphone:
If you desire to use the room displays as well, press the center of the screen to open the Display Control Window. Locate and touch the Microphone Icon located in the upper left corner of the display.
The Microphone Control window will open, which allows control of all available microphones. Move the sliders or use the up and down arrows to control the volume.
Touch the Mic icon to mute. Touch the muted icon to unmute.
The feedback box, located below, is intended for general comments on this page or service information and NOT for help with specific technical issues you are having with the service itself. If you would like a response to your feedback, be sure to include your contact information or log into it.byu.edu using the login button at the top of this page.